Archive for the ‘Uncategorized’ Category

I am Back / AC 45 World Series Plymouth

Sunday, September 11th, 2011

Hi all,
I haven’t blogged for more than a year due to lack of fun associated with the Assassin Fiasco, due to laziness and due to too much going on in my businesses.
Anyhow, I am finally over the Assassin thing (my boat is sold and all legal battles have ceased) and in a lot better mood business wise. And then when I sailed the zhik German Nationals at Wittensee (great post by Manfred here) I got addicted to moth sailing again – even though my result was the worst it could be with lots of letters on the scoresheet and a broken boat.
Anyhow I have decided to straighten all that out and I am starting with my own tool shed in Berlin, as I don’t want to do carbon work in my kitchen anymore (after sanding my assassin rudder I could find carbon dust in my kitchen drawers for weeks ;) . So first task is to set up shop and get the moth repaired and add a few xtras (ride hide adjuster and adjustable wand).
I also decided to spend more time mothing and I am especially happy that the German class association decided to put some funds up to organize professional trainings, powerboat and all.

I will write more about the topics mentioned above later but currently I got another topic I would like to share with you: I am in Plymouth watching the America’s Cup world series. And I can tell you one thing: the xtreme 40 series is a joke compared to this. It is just amazing how big and well organized this event is. The logistics measure up to formula 1 and the racing has been spectacular with 3 capsizes today, sun and 25kn of wind. The racing was very close and intense and it was awesome to watch the screen and the water simultaneously.

Plymouth made for a great venue as you are standing on a cliff and look down on the boats. When the boats where at the leeward gate you could see all the action – for the windward gate I used binoculars. I also managed to shoot some fotos:

Americas Cup World Series Plymouth

I’ll write a longer article about my impressions in the next few days.

Lake Garda

Monday, September 27th, 2010

I decided not to sail any regattas this year (except some on Wannsee) as I am still financially crushed by the Assassin nightmare. However I followed the europeans and the blog-mothosphere very closely and I can’t wait to get my boat sorted out and start sailing competitively again.

In the meantime I have been working on a new project, alendra.de an online store for sailing clothes and boat accessoires. It all started in March when we figured out that all the german online retailers are stuck in the 90ties. So we took our hard earned web knowledge we got from studdex and set up alendra which launched on June 6th. By now we got one full time employee and our goal is to be perfectly prepared for the season in February.

Last week I took my only vacation since March and went to our annual family meeting to Lake Garda with alendra (my Tornado) and heavencanwait 4 (my assassin). When I arrived on Saturday I was welcomed by a nice breeze, sun and 26°C. A dream come true. I managed to set up both boats on Saturday evening so everything was prepared for Sunday.

IMG_1520

On Sunday morning I headed out with my Assassin and it behaved great. I was chasing the surfers and had lot of fun. However after some time my assassin behaved worse and worse. I capsized every 10m and I couldn’t tack anymore. So all I did was jibe and try to get back to shore. It took nearly on hour till I got back on shore. There I figured out what the problem was: My hull was filled with water. When I unscrewed the inspection hatch I saw that the hull was 3:4 full with water after just 3 hours on the water. After I drained my boat and I also discovered cracks in the main foil. The outer coating was chipped and one could see the cracks in the carbon at the joint. After that I was reasonably pissed and decided to pack up the Assassin. I also decided to sell it. If anyone want it offers start at EUR 4000. The highest bidder till end of October will get it.

After that I still had lot of fun with heavencanwait 3 (my bladerider) and alendra (the tornado). One afternoon me and my dad took alendra and went up all the way to Malcesine and then hoisted the gennaker in 6 beaufort. We easily clocked 24 to 30 knots downwind and nearly pitchpoled twice. It was pure fun.

Unfortunately it started raining on Friday and the outlook for the weekend wasn’t any better. Thus I decided to pack up my things a day early and drove back to Berlin on Friday night. When I arrived on Saturday morning at 9am lots of lasers where in the boatyard as they had the Berlin district masters. As it was a perfect sunny day with 14knots I unloaded my Bladerider and followed the lasers to the starting line. There I had lots of fun foiling around all the boats. Many laser sailors looked at me in awe and to quote Koos: the per knot price of a moth is definitely worth it.

Around 1am I got really tired as I didn’t get any sleep and I went back to the club, packed up the boat and then went home where I fell asleep right away.

Now the weather in Berlin turned cold (around 14°) and I can already picture me sailing in snow in my drysuit. Something to look forward to ;-(

What has been going on

Tuesday, July 13th, 2010

With great interest I have read all the blog posts about the UK and the German nationals. As always Phillippe has covered the UK very well while Fred is still Germany’s best blogger and also very active joining lots of events.

I personally didn’t attend any moth regattas this year and do not plan to do so. Instead I try to clock as many hours as possible on Wannsee. With the current amount of work it is just easier to sail here instead of travelling.

Even though I still managed to sail one regatta outside of Berlin: Kiel Week. I teamed up with my dad on the Platu 25 and we had lots of fun in Kiel even so the wind was rather light.

On the Assassin front nothing has happened. Fastcraft has not responded at all and is just dead silent. I am still trying to get my money back but have decided not to focus too much time on this matter but rather move on.  In the meantime I keep hearing stories about Assassin breakages and just feel sorry for all those sailors that bought one.

If I would have put all the time I spent with fastcraft improving my sailing I could pull off foiling jibe after foiling jibe now.

Assassin follow up II

Sunday, June 20th, 2010

By now many people have said a lot of stuff about my post from Friday. Many people think that it was not appropriate to publish everything the way I did and badmouth fastcraft. And I agree with them. It was not a nice thing to do but I still don’t regret doing so. fastcraft had a lot of time to solve the issues and even though it appears I have made a split decision let me assure you that it took me more than 7 month of trying other means to solve the issue. I had long skype discussions with various mothies about the issue and finally decided to go public so other people are not tricked the way I was.
To make one thing clear, it is not my goal to change anything with my post. It is not meant as a tactic to pressure fastcraft into doing anything. I personally have given up on them and don’t believe they will ever be decent business man.
And there is a second point I want to make clear: I never did get involved with fastcraft to make a lot of money and it wasn’t a pure business decision. However I did not expect all the amount of trouble and financial loss that occured. From my talks with Darren and Holly I was convinced that they understood customer support and were eager not to repeat Bladeriders mistakes – I was wrong!

In the meantime it was demanded that all references to my blog or fastcrafts blog are taken down from the IMCA site. I have sent an email saying that I understand the situation and that I won’t object as long as it is not permanent.

Update to the post never ever buy an assassin moth

Saturday, June 19th, 2010

Yesterday I published the post Never, ever buy an Assassin moth. The story of how I got fucked. Today the first responses came in. 4 people have commented on the post, some supportive, some not liking me going public.

In addition I have received a long email from an Assassin owner who agrees with me and who had waited forever and when he finally got his boat it kept breaking. He said that the boat looked like it had been build by “a small blind monkey”.

In addition Assassin has repsonded to the post too:

Lost Owners

Anyone who has paid Felix Schulte, Germany money and not received a boat please contact the factory, sales@fastcraft.co.nz
He is not a reseller, under no circumstances pay him any money for anything related to Assassin.

To make things clear: I haven’t taken any money from customers since late October. Instead I suggested to everyone to wait till the issues are resolved. I personally do not want to have anything to do with fastcraft anymore and I have changed the foilermoth.com website and got rid of all mentions of Assassin.
Currently there is only one person who has paid money to me and is still waiting for his boat. He has paid the 30% downpayment and the other funds assassin still has are from my company olapa. Unfortunately we have a disagreement about how much has been paid due to differences in exchange rates and banking charges. (the difference in exchange rates amounts to NZD 2400) Thus I have repeatedly asked for their statements of account so we can solve the issue. Unfortunately that has not been provided yet.
And of course there is one customer who has made a downpayment but does not want a boat anymore. I refunded his money and told Holly to use the downpayment for remaining balance of another boat. She told me that I don’t need to take the boat but they would keep the downpayment. All this can be read in detail in my previous post.

Never, ever buy an Assassin moth. The story of how I got fucked

Friday, June 18th, 2010

This blog has been quiet for quite some while. The truth is that I would have had more than enough to tell but decided to stay quiet.  The main issue is that I have had lots of trouble with assassin which has cost Lukas (my business partner) and me a whole lot of trouble.

to make a long story short:

if you are involved with Assassin – you are FUCKED

and here is the story how I got fucked:

Today has come the point that I am frustrated enough to go public with the whole fastcraft – olapa affair (fastcraft is the company that produces the Assassinmoth and olapa is Lukas and my company that has sold them).
As I want to explain the happenings of over a year this blog post is likely to be rather long. Still I want to take the time to explain the situation as fairly as possible. So let us start at the beginning:

Meeting the people behind the Assassin
In April 2009 I flew down to New Zealand for an international education conference for my other company studdex.com. I took the chance to get in contact with Darren and Holly of fastcraft. Thus I drove down to Tauranga and met with the two of them. Both Darren and Holly seemed to be really nice people and I was impressed with the first protoype I saw. I still think that the Assassin is a great design and I especially like the construction of the wingbars. While the Mach2 is definitely the best moth I have sailed yet the Assasssin tried to be radical and different – something I really like in a development class. After looking at their factory I invited them to supper where we discussed the moth business. Darren repeatedly told me stuff like: We want to do a better customer  support than Bladerider has (as a former Bladerider reseller for NZ he knew what he was talking about) and we want to build reliable boats. He specifically pointed out that the gunwales and more added ribs would make for a lot stronger boat. He finished with saying that he thinks a moth shouldn’t be so much more expensive than a laser…

Over the course of the meal I got excited and suggested to them that I could be their reseller for Europe. After some – not to rough- negotiations I ended up with Germany, Scandinavia, Benelux, Switzerland, Italy, Poland and the Czech Republic. I could not get Austria as that had previously been awared to Niki. The reseller agreement also stated that I should get 10% commission of the package price and some other specs that would become relevant some time later. (you can download the reseller agreement here)

Getting started as a reseller

Very exicted I got back from my down under trip (where I also flew to Melbourne to meet Lochy which whom I had a lot of fun) and started to get to work.  We build the foilermoth.com website  (launched middle of July) and migrated my old foilermoth blog from blogspot to wordpress. We created our own T-Shirts and ran Ad-Words campaigns for the foilermoth.com site and put banners on some websites like the imca. All in all we spent 2199 EUR on Marketing Assassin in addition to building the website which was a two week assignment for my web designer.  So I figure I have roughly spent EUR 4000 on marketing the Assassin in Europe.

Fortunately all the effort put in seemed to pay off. By end of August I had 4 orders plus my boat. In addition I had lots of requests and discovered that the demand for a cheap moth is there and I am certain that we will see the fleet grow in heaps with more boats coming on the market and a wider adoption.

Problems with deliveries and communication began

Unfortunately this is when the problems began. The communication with Assassin was really bad from the very beginning and Ian Gotts, Niki Liebscher, Jon Emonson, Paulo Cortes Rosa and me started having long skype conversations about the problems.  By this time it had become clear that Darren was taking care of production while Holly was responsible for all outside relations and my main point of contact:

In an email on September 9th Holly wrote the following:

“I’ve pushed you in, and am aiming to get your boat to you in September as well as Nikis”

you can download the whole email as pdf here

In addition the other boats were promised in September, Oktober and November. You can find proof of the initial delivery dates in these email correspondations:

September

November

end of December

January

Assassin test sailing without an Assassin

As Niki was as excited to promote the class as I was and he set up a great Training event for the last weekend of September at lake Neusiedel. We promoted the event with great effort and I planned to drive down there. In an email Holly promised us that Niki’s assassin would be there in time and we eagerly announced a chance to test sail the assassin.  Unfortunately the following email arrived from Holly:

“On another note we have a huge problem with Niki. Its starting to look like we won’t get his boat to him in time for next weekend. We are trying our best but not looking good.”

As my assassin rudder had broke the week earlier niki was stuck with only two boats and was proportionally pissed.

First financial disagreements

During this time I received the first invoices for the boats. That is when I discovered that they did not account for my 10% share but more something like 7%. When I asked Holly about it she did not respond for a while. Then, some two weeks later I finally got an email saying that I don’t get a commission on freight. Unfortunately the reseller agreement states that I get 10% of the package price – and the no fluff package included freight. This is when I wrote the following email:

Hi Holly,

Last week I have sent you an email regarding the commission on the boats. As you know the contract and your price list do not match.

Unfortunately I haven’t received an answer from you regarding this problem. I would like to have this problem solved and will not continue to put any more work into reselling until we have clarified the situation.

Hope to hear from you soon

best

Felix

This is when I stopped my advertising campaigns and did not promote the Assassin any longer. I still got enquiries but told everyone to wait till the whole mess was solved. Unfortunately that still has not happened to this day.

Finally the boats are (not) ready
In December my boat was the first one to be delivered, on December 18th. And this despite it being started on September 23rd according to Holly:

“Your boat has been started, the parts are under production after I had received my boat (which I couldn’t sail due to ice on the lake till end of March) I received the following email from Holly on December 16th:

Hi Felix

Thanks for that. We were going to do the first 3 boats together though so will need full payment for at least these 3 if you were wanting to get them out over the Christmas break. We will send Freds boat first which is scheduled to leave the factory this month.

Cheers

Holly”


Very happy with this news I sent a few more emails to Holly with information about delivery addresses and boat specs (like soft or hard mast etc). A few days later, on December 22nd Holly demanded the money and put great pressure on me to advise it. This is what I did. Unfortunately I had to wait for my customer’s money and then forward it. So truthfully it took roughly 10 days till the money arrived after I got the email. In addition it is kind of difficult to make out a payment to New Zealand. So on December 17th I received the following mail from Holly:

Can you please advise on payment, we are fast running out of time. Haven’t received anything yet,”

I wasn’t suspicious at the time but now I realize that they probably must have been in some financial stress (note: this is just speculation and something I cannot prove). Thus I responded with the following mail on Dec 22nd:

Hi Holly,

here is the email I used to advise payment (I can’t transfer money to NZ online so I always have to tell the bank). It is German but as you can see I have advised payment 5 days ago. I will call up the bank 2morrow

best

Felix

PS.: Please give me the delivery dates for all the boats that are still to be delivered”

(attached was my email to the bank)

As Holly got kind of nervous she even contacted one of my customers directly and told him that they wouldn’t work with me anymore and he should advise the money directly to them. Fortunately he did not do that but contacted me instead. He and I were furious about the situation.

You can find the email Holly send to my customer here

Then there was Christmas break and I went skiing with the youth of my sailing club, an event I have been organizing for the last 4 years. When I returned one of my customers had paid up and I advised more money on January 13th.

When I still had not heard anything I sent an email on January 27th:

Hi Holly,

January is drawing to an end now and Thomas and Frederik have both paid there boats up. Can you give me an exact delivery date and how things are going on your end? Frederik has already cancelled his plans for Dubai (like me) and the German season starts in less than 4 weeks as winter draws to an end.

best

Felix”

This is when I got the following answer from Holly:

“We have just got the materials last week and both boats started. We will have them both out in the next couple of weeks. What is the delivery address for Thomas boat?”

So I had been tricked into paying the full amount which is due upon delivery according to the reseller agreement even though the boats hadn’t even been started. This was the time when all other resellers cancelled their contracts. They had been lucky as fastcraft only fucked them for their time while I was fucked for time AND money. Also the other resellers did not have customers which I did. And those customers grow more and more impatient (which they had every right to be!!!)

Let the lawyers out
After lots of emails regarding delivery dates etc my frustration grew. Thus I told my lawyer to write up a nice letter to fastcraft which was send out on March 23rd. You can download the letter here.

A few days later Holly sent the following answer to my lawyer:

“Dear Mr Eggert,

Information you have received from Felix Schulte is incorrect. I will be forwarding all correspondence onto my lawyer who will be in touch.

Felix has a large amount outstanding, All boats need to be paid for in full before they are sent, Also will be taking action against Felix Schulte personally for his misconduct, Regards

Holly Farmer”

As it is they didn’t use their lawyer and we send more emails back and forth. After some more trouble finally the first customer boat arrived:

Some boats arrive

Frederik’s boat finally arrived on April 7th. Unfortunately that didn’t mean he could get it as fastcraft had made out all the documents to him and not to olapa. This meant that I couldn’t take care of duties and import and Frederik had to do it all in his own name. This meant that Frederik needed to drive to the airport 2 times and it took a week till he got control of his boat.
Just to be precise: Frederik ordered on September 3rd.

On May 6th Thomas boat was delivered to Munich airport. This time the pick up all worked fine as all the documents were correct. I thought this was great news until Thomas called me to tell me that his mast stump it just awry. You can see a picture of it here:

Foto0209

Obviously I emailed fastcraft about a replacement part. Their response:

“The mast stump has been in and tested in the factory (it is glued together on the boat, so if it is all together correctly will fit better than a new one then all reassembled after painting) . Go for a sail and it will be good”

After even more emails they finally send a new mast stump. Unfortunately they didn’t mark it as a warranty shipment so Thomas had to pay some 70 EUR for customs.

A boat has been cancelled

My very first customer Roland Seidler cancelled his boat because he was not willing to wait much longer. When I told this fastcraft I got a very “nice” response:

“We can’t cancel this order, its nearly ready to ship just waiting on your payment and the delivery address. We had Roland scheduled down as your first boat but you changed production spots for Freds boat. Paying the deposit is a commitment to the boat”

Obviously I did not accept this as Ronald’s boat had been ordered beginning of August and in my opinion he had every right to cancel! Everytime I asked about Ronald’s boat I did not get an answer though everytime fastcraft send me a financial statement I was asked to pay for his boat. Then yesterday I finally got an answer regarding this boat:

“a deposit was paid which committed you to this boat, so lose the deposit or make the final payment and the boat will be sent”

So in their opinion the boat doesn’t need to be delivered but then they can keep the 30% down payment. Nice, isn’t it?

The last boat and more financial trouble

So let me tell you where we are right now: I am still waiting for one last boat (or two depending on the cancellation of Ronald’s order). Holly is currently saying that they cannot ship it as it is not fully paid. This is true!. Why haven’t I paid it up yet? Because we have problems with payments:
- Holly somehow send me a financial statement that shows that she got roughly EUR 1000 less than I paid according to my bank statements. This is due to two things: exchange rates and banking charges (according to my reseller agreement these will be split evenly between olapa and fastcraft).

- she did not account for the extra cost that occurred as Thomas replacement mast stump was not sent as a warranty shipment and he paid money on customs (see earlier point). Also they shipped the replacement part of my broken main foil to Munich and I had to pay shipping to Berlin.

Thus I send an email to Holly asking to solve this whole mess on June 9th:

Hi Holly, hi Darren,

I know we both want to get done with the last issues we have and then move on. In order to do this I have some questions you need to answer:

- I made you a bank transfer list including the german banking charges. But actually I do need your bank statements for having the possibility to compare the banking charges including the NZD amounts and the rates of exchange to our german amounts

- what about the CE Exemption Certificate for Assasin Moth? We paid that for you and you promised to deduct the balance. Unfortunately this payment was not accounted for in your financial statement you sent us. Please check your own mail attached to this email.

- Ronald Seidler’s boat: he canceled the deal because he almost waited 8 month to get his boat. Please confirm the cancelation for once and for all.

- Ralf Otto’s boat: what are you going to do about that? I think we have got two options: a) you deliver the boat quickly or b) you transfer the money back to us and do not ship the boat. Either way we have to figure out the amount first (see point 1)

- Extra Payments: Thomas Weltrowski had a claim about his broken mast stump. But instead of processing a reclamation, you made a new order for a mast stump, so Thomas had to pay the customs duties. All in all Thomas paid € 77.56.  Here is another need to deduct this amount from the balance.

- Felix Schulte: I ordered a new main foil, because mine was broken, but you delivered it to Munich (to Thoms Weltrowski), so I had to pay the shipping from Munich to Berlin. This cost € 90.54 we also need to deduct from the balance.-

And one last thing: my rudder is broken. I already told you about that. Are you going to deliver a new foil anytime soon?

Please respond to each point individually so we can see where we agree and where we don’t. This way I hope to solve the issues quickly.

All the best

Felix”

Unfortunately this email was not answered till yesterday. So I waited for 9 days for an answer. Why did they answer? Because I threatened to go public with the whole situation. I received an answer yesterday:

“Hi Felix,

Would you like to sort this out between ourselves or would you like to do it though the court?
Anything published on the internet or elsewhere will result in you being sued for damages.
If all Assassin material is not removed from the website you and Lucus Wrede will be sued.

Amount outstanding is $5419.90 NZD

Once paid the boat will be completed and sent providing you give a delivery address.
This is a final payment for ONE boat. I have taken the liberty of allocating ALL monies paid toward the last boat and also taken off the CE cert amount. If we go to court then we will be perusing the full amount, plus legal costs and damages.
We would like to sort this out ethically, playing dirty is not doing anyone any good and your making the whole situation worse when it doesn’t need to be.
Regards

Holly”

So again my email was not responded to in a proper way. I talked to a lot of people in the meantime and everyone encouraged me to speak out publicly. This is what I am doing right now and I am sorry that I didn’t do so earlier as it probably caused some people to make a mistake they otherwise would not have made namely buying an assassin. I also feel really sorry for my customers who are – beside myself – the true losers of this whole situation

A word on breakages
In my experience fastcraft builds two different kinds of boats: one for team sailors and one for regular customers. From what I hear the team sailor’s boats are of high quality and reach good speeds.
On the other hand my experience is more about the regular customers:
- both Jon and me had broken prodders
- my first Holroyd rudder broke on my bladerider on the first day on lake garda. Tried surfing instead

- on my first sail my main foil broke – the carbon was dry like the Sahara

- on my third sail my rudder broke
- all Assassin’s I know are leaking
- Frederik broke his gantry on the first day

- Frederik’s mast base was screwed
- Thomas push rod malfunctioned and he had the issues with the mast pole

- my second rudder broke as well and I still haven’t a replacement part.

A final word (these are my personal thoughts and my own opinions)

I deeply regret that I ever got in contact with fastcraft. Financially I roughly spent 4k on marketing and they currently have some 7k from olapa. Me and Lukas have both put additional money in the company and that is also why I currently do not own a car but share one with Lukas.
In addition I regret that I have put so much time into the whole issue and got so little reward.
And I am very sorry for my customers who are also in trouble.

In my experience fastcraft is a company that keeps lying and don’t hold up to their word. The product could be solid and good but the whole execution is terrible. When I read about the “export price” Assassin might get I want to regurgitate.

I want to be open about this whole process and of course a lot of stuff goes wrong and a lot of bad feelings arise. Obviously the tone of the emails was not always right and a lot of threats have been made on both sides (legal action, repression charges, putting this post online etc).
My goal now is to get over with this issue, be able to look my customers in the eye and focus on other businesses to regain my money.

As my father once said:
“it is great to make a business out of your hobby if it works – but if it doesn’t you will enjoy your hobby a lot less as you are always thinking about the bad business it caused”

Personally I don’t mind going to court as I got a strong case. In addition I will allow all kind of comments to this post.

Here are all the email correspondences in pdf format. Of course there are more. I can provide those if needed:

assassin_agreement.pdf

20101212_Holly_confirms_delivery_for_Decmber.pdf

20100618 holly_promises_delivery_of_ronald’s_boat_for_early_september.pdf

20100323_Holly_promises_delivery_of_thomas boat_for_November.pdf

20100323_email_from_Philippe_about_UK_website.pdf

20100323_direct_email_from_Holly_to_Frederik.pdf

20100323_comission_price_discussion_with_holly.pdf

20100323_answer_from_Holly_to_Andres_mail.pdf

20100312_letter_from_Andre_to_Assassin.pdf

20100302_response_to_the_issues.pdf

20100126 production_of_Thomas_and_Frederiks_boat_in_January.pdf

20091222_money_has_been_advised.pdf

20091207_Holly_promises_delivery_for_December.pdf

20091028_email_end_of_Ocotber.pdf

20091019_niki_to_holly_about_boat’s_delivery.pdf

20091013_threat_to_terminate_resellerships_if_they_are_not_supportive.pdf

20090923_no_boat_for training_at_lake neusiedel.pdf

20090909_holly_promises_shipment_in_september.pdf

20090623_scan_of_reseller_agreement_with_fastcraft.pdf

the Assassin’s Holroyd foils

Monday, February 1st, 2010

there is not much going on at the moment as all lakes are solidly frozen and I haven’t sailed any boats since Nov. 28th. With the winter as strong as it is only DN sailors like Fred have some fun.

In the meantime I thought I take the time and show you some more details about the Assassin. The foils have been designed by Nick Holroyd who is involved with the Emirates Team New Zealand. The rudder is very radical in design with the vertical being aft the horizontal. My first one broke but after some reinforcements on the joint there haven’t been any complaints. The main foils jont is very unique as it connects on a wider area and features two screws. In addition the Assassin foils are a lot longer than the BRs.

The wand mechanism is very simple and direct. An axle runs over the bow and the pushrod is lying inside a channel to the center board. Here are some pics to explain all the bs I just wrote ;-)

Bladerider is bankrupt! – and reborn

Tuesday, January 12th, 2010

My last post “is bladerider bankrupt” got quite a lot of attention and from all the comments I have received the following story seems plausible:

Bladerider had lots of problems and decided to voluntarily wind up the company. It seems like many investors and suppliers lost large amounts in this process. In addition the bladerider.com.au website is down. The domain is owned by KA Sails and we will probably see Amac using it sometime in the future.

In the meantime Bladerider has been re-incorporated as Bladerider 2010 Ltd. This new company is probably going to sell the old boats they still have had in stock (with guarentee???). Unfortunately no information is available on this new entity – they don’t even have a website…

I am curious to find out more and to see what happens with BR till the worlds…

is Bladerider bankrupt?

Friday, January 8th, 2010

I have just skyped with Niki who has found an some information on google:
Screen shot 2010-01-08 at 3.32.23

I am not sure if this website is trustworthy and if Bladerider is really bankrupt. I haven’t found any other evidence and the BR website doesn’t mention anything like this. However rumors that BR is in trouble have been circulating even before the 2009 worlds and you didn’t hear about many people ordering new Bladeriders.

Has anyone got more information?

PS.: Here is the link to the screenshot above

Silvestersailing – PORTOROZ – Slovenia

Tuesday, January 5th, 2010

short Trip for a wintersail!